1988 Kawasaki KLR 650
Walker, West Virginia

Picture of A 1988 Kawasaki KLR 650
Thumbnail Image of 1988 Kawasaki KLR 650
Thumbnail Image of 1988 Kawasaki KLR 650
Thumbnail Image of 1988 Kawasaki KLR 650
Thumbnail Image of 1988 Kawasaki KLR 650
Bids: 0  
Total Views: 338
Time Remaining:
Menu Down Arrow
  • If You're Selling A Dirt Bike,
    We're Providing 100% FREE Exposure
  • We Use A Non Invasive, User Friendly Interface
  • All Ads Are Human Moderated & Constantly Monitored
  • You Provide Only the Info You Want to Include
  • Get Seen By Thousands of Monthly Returning Visitors
  • No Signing Up, Credit Cards or Email Addresses Required
  • Steadily Improving and Roosting the Competition Since 2009
  • Less Info Than Craigslist or Cycle Trader Publicly Displays

Questions or Concerns? Send Me an Email

Here's More About It:

Title: 1988 model (Frame, Swingarm, Linkage, rear wheel) Engine: 2000 Model Year (MY) Body: 2005 MY Seat: 2008 MY Forks, Triples, Front wheel: 2001 Yamaha WR250F USD KYB 46mm (0.62 kg/mm springs. I still have the stock WR springs.) Shock: 1996 KLX650R with a gen 2 KLR shaft and clevis. 7.7 kg/mm spring Note: I had to install 1.5" lowering links to account for the additional length of the shock. The bike sits at approximately stock seat height. Engine mods: EM Doo w/torsional spring, EM 685 kit, carb drilled with KLX needle, Thermo-bob, KLX right side radiator, KLX radiator catch tank installed at back fender, Heavy duty clutch springs Pro-Circuit T4 slip-on with spark arrestor. I think it could stand being repacked. Radiators are aftermarket and new. I shimmed the valves when I did the 685 kit (~4000 miles ago), so they should still be in spec on clearance. I also removed the starter interlocks, so whenever you hit the starter button, it will turn the starter. I did that to minimize potential electrical gremlins. It has SW Motech crash bars. I added a gusset to them to prevent vibration. They were vibrating at 2500 and 5000 rpm, which was really annoying. The skid plate I have on it is aluminum and I have no idea who made it. MSR AOF clutch lever, MSR shift lever, prevailing torque nut on the countershaft. Located 9 miles east of Parkersburg, WV. Pickup only. Willing to drive up to 60 miles to meet. It developed an oil leak between the cases under the starter last year , so when I did the 685 kit, I split the cases to fix that leak. Replaced all gaskets and seals; I didn't want anymore leaks developing. The bottom end was still solid without much wear. I went ahead and rebuilt the water pump too. If you are on the ADVRider forum, I have a partial build thread there. Search "Another KLR650 Suspension Mod...Piggyback Shock & USD Fork"

Where This Motorcycle Is Located

City » Walker

State » West Virginia

Postal Code » 26180


Readers Rides On Our Classifieds

Picture of A 2009 Yamaha YZ 250

2009 Yamaha YZ 250
Clermont , Florida

Details

Always Crusading for Google+

Reckon We Cover More of Your Motorcycle Interests?
Find Out Right Now