Total Views: 4
Here's More About It:
Mild custom in ISDT style. Owned 5 years.Street legal. Used for senior citizen(slow) trail rides mainly. Please note : running condition untested in 2016. Stored indoors, drained gas October 2015. New piston and rebuilt crank 2yrs. Was idling fine last fall but not taking throttle well. Did put on new Strictly Hodaka Mikuni carb. Still wanted to bog with throttle. Very slow oil drip from left side crank.Will need some further carb adjustments or crank seal by knowledgeable bike rider! I don't know 2 strokes as well as 4 stroke engines. Don't bid if you don't have hands on experience with motorcycles please! Has sealed 6V battery. Loud horn works well. High -low headlight, brake and running lights new and work well. Tires, tubes and rim strips all new about 3-4 years ago, probably 200 miles on them. NOS Redwing adjustable rear shocks. New Hodaka current limiter, voltage regulator per factory recomendations, protects all bulbs from any voltage surge. 2 keys, clear title in my name.Selling to finance another small bike custom, retirement hobby. See photos, gets lots of compliments. 43 year old motorcycle with expected wear, no warranty. Reserve right to end auction early for local sale. Survival knife for photos only, not included. Look at photos carefully. Beautiful bike. Will not ship, but will work with your shipper to load. I have upcoming trip end of April for a week, just a heads up for planning pickup.On Apr-06-16 at 06:14:44 PDT, seller added the following information: Note to Questions: Yes I can store it as long as needed for pickup in my shop. No, I don't do transactions off eBay. No reserve auction. Thank you!On Apr-08-16 at 10:11:27 PDT, seller added the following information: Answers to more Questions: the engine guard plate is not stock. I made it from aluminum plate, drilled, primed and painted with VHT high temp paint. Mounted with McMaster- Carr fasteners.The knee rests are my design using 1937-39 Ford rumble seat step pads. They are solidly bonded on the tank with E6000 adhsive. The stainless steel pan head Phillips screws are cut off at the head and bonded in the little round recesses on the pads. They "look like" screws but Do Not penetrate the tank!
Where This Motorcycle Is Located
Cheyenne » Wyoming » 82007